U60TSEK-U300TSEK

Zhejiang Sonly Intelligent Equipment Co.,ltd

		U60TSEK
Specifications			L			M
Injection Unit		A	B	C	A	B	C
Injection Device
Screw Diameter	mm	20	24	28	24	28	32
Screw Ratio	L/D	21	21	19	21	21	19
Theoretical Shot Volume	cm³	28.3	40.7	55.4	49.7	67	88
Injection Pressure	MPa	255	220	168	255	220	168
Theoretical Shot Weight	g	25.7	37	50.4	45.3	61	80
Theoretical Injection Speed	mm/s	350
Contact Force of Nozzle	KN	15
Screw Speed	rpm	400
Locking Device
Clamping Force	KN	600
Toggle Stroke	mm	270
Space Between Tiebars	mm	370*320
Max Mould Height	mm	370
Min Mould Height	mm	150
Ejector Stroke	mm	70
Ejector Force	KN	30
Ejector Number		4+1
Die Hole Diameter	mm	100
Other
Heter Power	KW	7.5			8
Machine Weight(Approximately)	Ton	3.2			3.5
Overall Dimensions（LxWxH）	m	4.11.31.6			4.11.31.6
Power	KW	22+7.1+11			25+16+11

		U100TSEK
Specifications			L			M			N
Injection Unit		A	B	C	A	B	C	A	B	C
Injection Device
Screw Diameter	mm	20	24	28	24	28	32	28	32	36
Screw Ratio	L/D	21	21	19	21	21	19	24	21	18.7
Theoretical Shot Volume	cm³	28.3	40.7	55.4	49.7	67	88	80	104.5	132.3
Injection Pressure	MPa	255	220	168	255	220	168	261	200	158
Theoretical Shot Weight	g	25.7	37	50.4	45.3	61	80	72.8	95.1	120.4
Theoretical Injection Speed	mm/s	350			350			350
Contact Force of Nozzle	KN	15			15			20
Screw Speed	rpm	400			400			400
Locking Device
Clamping Force	KN	1000
Toggle Stroke	mm	340
Space Between Tiebars	mm	440X390
Max Mould Height	mm	450
Min Mould Height	mm	140
Ejector Stroke	mm	100
Ejector Force	KN	30
Ejector Number		4+1
Die Hole Diameter	mm	125
Other
Heter Power	KW	7.5			8			10.5
Machine Weight(Approximately)	Ton	3.5			3.8			4.2
Overall Dimensions（LxWxH）	m	4.8x1.35x1.8			4.8x1.35x1.8			4.8x1.35x1.8
Power	KW	22+7.1+16			25+16+16			30+16+16

		U130TSEK
Specifications			L			M			N
Injection Unit		A	B	C	A	B	C	A	B	C
Injection Device
Screw Diameter	mm	24	28	32	28	32	36	32	36	40
Screw Ratio	L/D	21	21	19	24	21	18.7	23.6	21	19
Theoretical Shot Volume	cm³	49.7	67	88	80	104.5	132.3	120.6	152.6	188.4
Injection Pressure	MPa	255	220	168	261	200	158	253	200	162
Theoretical Shot Weight	g	45.3	61	80	72.8	95.1	120.4	109.7	138.9	171.4
Theoretical Injection Speed	mm/s	350			350			350
Contact Force of Nozzle	KN	15			20			20
Screw Speed	rpm	400			400			400
Locking Device
Clamping Force	KN	1300
Toggle Stroke	mm	380
Space Between Tiebars	mm	470*420
Max Mould Height	mm	480
Min Mould Height	mm	180
Ejector Stroke	mm	100
Ejector Force	KN	30
Ejector Number		4+1
Die Hole Diameter	mm	125
Other
Heter Power	KW	8			10.5			14
Machine Weight(Approximately)	Ton	4.1			4.4			4.7
Overall Dimensions（LxWxH）	m	4.8x1.35x1.8			4.8x1.35x1.8			4.971.41.73
Power	KW	25+16+21			30+16+21			40+16+21